This kit allows you to upgrade your exiting Pentair® Spabrite® or Aqualight® spa lights to LED. The front of the fixture looks like the picture below. If it looks like that and is approximately 6 inches in diameter including the rim. This is the kit you need.
There are several options available. First you must determine if your light is 12VAC or 120VAC. Both look exactly the same, the only difference is the bulb inside which also looks the same. Some counties in the US require 12VAC pool lighting by law, most don't, but you could have either. Use the options above to select proper voltage. Using improper voltage will destroy the bulb.
Second option is the style of bub the lights use. There are three types found in these fixtures. If you are not sure which one call us first. Below are the three kinds found from most common to least common:
Type 1 - Standard Edision Screw base, aka E27, E26 or PAR20
Type 2 - Mini Candelabra Halogen bulb, aka E11 or T4, only found in 120V Pentair® Aqualights®
Type 3 - Least common - Only found in 75W 12VAC Spabrite® fixtures, aka MR16 two pin
Be sure to select the proper voltage as well as connector style
This kit allows you to upgrade your Pentair® SpaBrite® or Aqualight® Spa lights to LED. No need to drain your pool or spa and no need to buy an entire new lighting system. Using state of the art LED technology this kit will allow you breath new life and a greater appreciation for the investments you have already made. It literally will change the way your back yard looks at night.
This kit consists of the following:
1 - White LED Bulb
1 - Pentair® compatible Lens Gasket
1 - Pentair® compatible Brass Pilot screw with gum washer
Fits all standard Pentair spa fixtures.
Bulbs are covered by a 1 year warranty, click on link below for full warranty details