This kit allows you to upgrade your exiting Hayward® Astrolite II® spa light to color LED. The front of the fixture looks like the picture below. If it looks like that and is approximately 6 inches in diameter including the rim. This is the kit you need.
There are several options available. First you must determine if your light is 12VAC or 120VAC. Both look exactly the same, the only difference is the bulb inside which also looks the same. Some counties in the US require 12VAC pool lighting by law, most don't, but you could have either. Use the options above to select proper voltage. Using improper voltage will destroy the bulb.
Second option is the style of bub the lights use. There are three types found in these fixtures. If you are not sure which one call us first. Below are the three kinds found from most common to least common:
Type 1 - Standard Edision Screw base, aka E27, E26 or PAR20 - Found as either 120V 60 watt - also identical to 12V 60 and 100 watt
Type 2 - Mini Candelabra Halogen bulb, aka E11 or T4, only found in 120V 100 or 250 watts
Type 3 - Least common - Only found in 75W 12VAC fixtures, aka MR16 two pin
For type 3 option please click link below:
Be sure to select the proper voltage as well as connector style
No need to drain your pool or spa and no need to buy an entire new lighting system. Using state of the art LED technology this kit will allow you breath new life and a greater appreciation for the investments you have already made. It literally will change the way your back yard looks at night.
This kit consists of the following:
1 - Color LED Bulb
1 - Hayward® Lens Gasket
1 - Hayward® Brass Pilot screw with gum washer
Fits all standard Hayward® Astrolite II® spa fixtures.
Bulbs are covered by a 1 year warranty, click on link below for full warranty details