Inicio
Productos
PoolTone™ R0474100 Color LED Kit for Jandy® WaterColors® 120V PCBA Pool Aftermarket
PoolTone™ R0474100 Color LED Kit for Jandy® WaterColors® 120V PCBA Pool Aftermarket
$ 499.99 USD
You know what's worse then spending over $1000 dollars for a color LED pool light? Having the internal board fail right after the warranty expires. Fixing it using OEM parts is $900 or more, but even worse is that it will fail again the same way as before.
We designed our replacement board to be better and last longer and sell it at a much lower price. Our aftermarket 16 Color LED PCB light engine kit allows you to repair or upgrade your existing Jandy® WaterColors® 120V light.
PoolTone™ 16 Color LED Boards are brighter than OEM LED fixtures.
This kit consists of the following:
1 - 16 Color LED board
1 - Controller module
1 - Single Mount Screw
1 - Lens Gasket
1 - Brass Pilot screw with gum washer
Fits all standard Jandy Pool size fixtures
16 Color / Show Options - 7 Solid colors - 9 Color shows
Neutral White, Red, Light Blue, Dark Blue, Green, Cyan and Purple, Smooth Color Transition, Single Color Fade, Medium Color Changing, and Fast Color Changing.
Lights are controlled by light switch. To advance lights you simply turn off/on within 8 seconds to advance to next color option. Lights have a memory function so when turned off longer than 8 seconds they will remember the last setting when turned back on. Lights are rated for 50,000 hours of operation.
This board is for the larger pool size fixtures approximately 10 inches in diameter. See picture below, if your light is smaller then that you likely have the spa sized fixture.
Fits Zodiac Jandy WaterColors LED large light engine models CPHVLED, CPLVLED
The 120 Volt version comes with a pool saftey transformer included in the price that must be installed in between the end of the light cord and your house. This is a safety device and also makes the light run at 12VAC which creates much less heat so your light will last much longer.
Available in both 120V and 12V
Lights consume 35 Watts of power and are the highest powered (brightest) nicheless lights available in the US
Lights are rated for 50,000 hours of operation
Comes with a 1 year warranty
There are a total of 16 color/show combinations
7 solid colors and 9 color shows
Lights are controlled by light switch, no separate controllers needed
To advance lights you simply turn off/on within 8 seconds to advance to next color option
Lights have a memory function so when turned off longer than 8 seconds they will remember the last setting when turned back on
**NOTE** - All underwater color LED lights from all vendors only work at 12VAC. Larger fixtures hide the transformer inside but due to the slim size of this light we ship 120V versions with a weather resistant outdoor pool safety transformer that must be installed at your house to convert 120 to 12VAC. Any light ordered as 120V will come with an EMCOD transformer included in the price. Details on this device can be found at the link below.
We also offer a smaller version designed to fit inside existing junction boxes, this version is very small,dimensions (inch): H = 1.31, W = 1.62, D = 3.4 and fits into most standard junction boxes, if you prefer the smaller internal version just let us know:
** NOTE ** These LED boards can be used with optional home automation systems, third party light controllers, external controllers, remotes and power controllers; but because this board has more colors and shows then OEM, some pre-programmed remote control options can not reach all of the colors and shows. Integration with home automation systems and software from most companies have been and can be integrated to function properly. Most customers use the free built in option. Lights, colors and shows are controlled by simply using your existing light switch. If you have more than one fixture, you will not be able to sync lights unless you replace all the boards at the same time. Please call us if you have any questions